Thermocouple NTC input High Resolution Digital Indicator

Introduction:

Service Life: Use the Digital Controller within the following temperature and humidity ranges:
Temperature: −10 to 55°C (with no icing or condensation), Humidity: 25% to 85%.
●The products is fully conpatible with pressure sensors, temperature sensors, displacement sensors and liquid-level sensors.
●Display Mode:Digital display: -1999~9999, decimal place optional through settings;lightness bargraph display(level beams): 0-100%
●Bar-Graph Display:This is a function of displaying Measured value (PV),PV is displayed in a span of from 0 to 100 %.
●Can be output an alarm when the deviation, process value, set point, or manipulated value reaches a specified value.
●With any model that supports communications, you can use communications , Modbus-RTU
●With any model that provides a transfer process value as a 4 to 20 mA or 1 to 5 V transfer output.

Input Sensor:

●Current input (analog input): 4 to 20 mA DC, 0 to 20 mA DC
●Temperature input: CU50(–50.0～150.0℃)/PT100(–199.9～600.0℃)/K(–30.0～1300℃)/E(–30.0～700.0℃)/J(–30.0～900.0℃)/T(–199.9～400.0℃)/S(–30～1600℃)/R(–30.0～1700.0℃)/WR25(–30.0～2300℃)/N(–30.0～1200.0℃)
-A single input: The input sensor type is fix by the factory .Input type cannot be select. eg.the instrument's input type is 4 to 20 mA

Alarm (ALM) function:

●Process high alarm
●Process low alarm

Alarms:

●1~4 Relay outputs

Dimensions:

h×w×d(Unit: mm) 160×80×85 152×76;
A:96×96×110 92×92;
D:72×72×110 68×68;
E:48×96×110 44×92;
F:96×48×110 92×44;
G:48×48×110 44×44;
R(din35): 88mm ×72mm ×59mm 。

Transfer Output:

(Optional features)With any model that provides a transfer process value as a 4 to 20 mA or 1 to 5 V transfer output.

Communications:

(Optional features)RS485/RS232 Modbus RTU Communications

Terminal Arrangement: